Factory Supply Super Thin Copper Wire For Coil Winding - 0.05mm Enameled Copper Wire for Ignition Coil – Ruiyuan

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

Our commission is to serve our users and clients with best quality and competitive portable digital products for Winding Wire, Magnet Copper Wire, Profiled Copper Litz Wire For Automotive, Honesty is our principle, skilled procedure is our perform, service is our target, and customers' satisfaction is our long term!

Factory Supply Super Thin Copper Wire For Coil Winding - 0.05mm Enameled Copper Wire for Ignition Coil – Ruiyuan Detail:

The working principle of automobile ignition coil is to convert low voltage of DC power to high voltage of DC by inversion and dual voltage rectification which passes through the primary of the ignition coil intermittently. A high voltage is induced in the secondary of the ignition coil ( Generally around 20KV) and then it drives the spark plug of ignition coil to discharge for ignition. It’s difficult to control some properties of conventional enameled wire for automotive ignition coils as broken wire often occurs during process. Considering special requirements of ignition coils, our company designs a unique enameled wire for automotive ignition coils with excellent appearance, good solderability, high softening resistance and stability during manufacturing. We use drawn copper wire that is initially covered with base coat soldering at low temperature. Then the wire is additionally coated with softening-resistant enamel. Components of this wire is polyurethane with high temperature resistance.

One of the characteristics of enameled wire (G2 H0.03-0.10) for the secondary of automobile ignition coil is that its diameter is extremely thin. The thinnest is only about one-third of human hair. Moreover, as it is a wire with thick polyurethane enamel of thermal class 180C, it has rather high demands on the manufacturing process. Our company has abundant experience and mature and advanced technology in enameled wire design for automotive ignition coil. The production process is stable.
1. Improvement of the softening resistance so at not to break during softening breakdown under the condition of 260℃*2min.
2. better soldering performance, the soldering surface is smooth and clean without solder slag under the condition of 390℃*2S.
The rate for wire breakage in the production process is reduced from more than 20% to less than 1%, so that the surface is smoother and the conductivity is stable.

1. We adopts a composite insulation: enamel with low temperature soldering property is used as base coat, and enamel with high softening resistance as topcoat to produce composite enameled wire with good solderability and high softening resistance.
2. Improvement the production technology of enameled wire: change of concentration of drawing oil during drawing. Mould set for manufacture management is conducive to smooth surface of copper wire. Installation of automatic viscosity adjustment device and automatic tension control device in the enamelling process reduces the rate for wire breakage.

Diameter	Tolrance	Enameled copper wire(overall diameter)
(mm)	(mm)	Grade 1		Grade 2		Grade 3
		Min.(mm)	Max.(mm)	Min.(mm)	Max.(mm)	Min.(mm)	Max.(mm)
0.030	*	0.033	0.037	0.038	0.041	0.042	0.044
0.032	*	0.035	0.039	0.04	0.043	0.044	0.047
0.034	*	0.037	0.041	0.042	0.046	0.047	0.05
0.036	*	0.04	0.044	0.045	0.049	0.05	0.053
0.038	*	0.042	0.046	0.047	0.051	0.052	0.055
0.040	*	0.044	0.049	0.05	0.054	0.055	0.058
0.043	*	0.047	0.052	0.053	0.058	0.059	0.063
0.045	*	0.05	0.055	0.056	0.061	0.062	0.066
0.048	*	0.053	0.059	0.06	0.064	0.065	0.069
0.050	*	0.055	0.06	0.061	0.066	0.067	0.072
0.053	*	0.058	0.064	0.065	0.07	0.071	0.076
0.056	*	0.062	0.067	0.068	0.074	0.075	0.079
0.060	*	0.066	0.072	0.073	0.079	0.08	0.085
0.063	*	0.069	0.076	0.077	0.083	0.084	0.088
0.067	*	0.074	0.08	0.081	0.088	0.089	0.091
0.070	*	0.077	0.083	0.084	0.09	0.091	0.096
0.071	±0.003	0.078	0.084	0.085	0.091	0.092	0.096
0.075	±0.003	0.082	0.089	0.09	0.095	0.096	0.102
0.080	±0.003	0.087	0.094	0.095	0.101	0.102	0.108
0.085	±0.003	0.093	0.1	0.101	0.107	0.108	0.114
0.090	±0.003	0.098	0.105	0.106	0.113	0.114	0.12
0.095	±0.003	0.103	0.111	0.112	0.119	0.12	0.126
0.100	±0.003	0.108	0.117	0.118	0.125	0.126	0.132
0.106	±0.003	0.115	0.123	0.124	0.132	0.133	0.14
0.110	±0.003	0.119	0.128	0.129	0.137	0.138	0.145
0.112	±0.003	0.121	0.13	0.131	0.139	0.14	0.147
0.118	±0.003	0.128	0.136	0.137	0.145	0.146	0.154
0.120	±0.003	0.13	0.138	0.139	0.148	0.149	0.157
0.125	±0.003	0.135	0.144	0.145	0.154	0.155	0.163
0.130	±0.003	0.141	0.15	0.151	0.16	0.161	0.169
0.132	±0.003	0.143	0.152	0.153	0.162	0.163	0.171
0.140	±0.003	0.151	0.16	0.161	0.171	0.172	0.181
0.150	±0.003	0.162	0.171	0.172	0.182	0.183	0.193
0.160	±0.003	0.172	0.182	0.183	0.194	0.195	0.205
0.170	±0.003	0.183	0.194	0.195	0.205	0.206	0.217
0.180	±0.003	0.193	0.204	0.205	0.217	0.218	0.229
0.190	±0.003	0.204	0.216	0.217	0.228	0.229	0.24
0.200	±0.003	0.214	0.226	0.227	0.239	0.24	0.252

Diameter	Tolrance	Resistance at 20 °C
mm	mm	Nom(ohm/m)	Min(ohm/m)	Max(ohm/m)
0.030	*	24.18	21.76	26.6
0.032	*	21.25	19.13	23.38
0.034	*	18.83	17.13	20.52
0.036	*	16.79	15.28	18.31
0.038	*	15.07	13.72	16.43
0.040	*	13.6	12.38	14.83
0.043	*	11.77	10.71	12.83
0.045	*	10.75	9.781	11.72
0.048	*	9.447	8.596	10.3
0.050	*	8.706	7.922	9.489
0.053	*	7.748	7.051	8.446
0.056	*	6.94	6.316	7.565
0.060	*	6.046	5.502	6.59
0.063	*	5.484	4.99	5.977
0.067	*	4.848	4.412	5.285
0.070	*	4.442	4.042	4.842
0.071	±0.003	4.318	3.929	4.706
0.075	±0.003	3.869	3.547	4.235
0.080	±0.003	3.401	3.133	3.703
0.085	±0.003	3.012	2.787	3.265
0.090	±0.003	2.687	2.495	2.9
0.095	±0.003	2.412	2.247	2.594
0.100	±0.003	2.176	2.034	2.333
0.106	±0.003	1.937	1.816	2.069
0.110	±0.003	1.799	1.69	1.917
0.112	±0.003	1.735	1.632	1.848
0.118	±0.003	1.563	1.474	1.66
0.120	±0.003	1.511	1.426	1.604
0.125	±0.003	1.393	1.317	1.475
0.130	±0.003	1.288	1.22	1.361
0.132	±0.003	1.249	1.184	1.319
0.140	±0.003	1.11	1.055	1.17
0.150	±0.003	0.9673	0.9219	1.0159
0.160	±0.003	0.8502	0.8122	0.8906
0.170	±0.003	0.7531	0.7211	0.7871
0.180	±0.003	0.6718	0.6444	0.7007
0.190	±0.003	0.6029	0.5794	0.6278
0.200	±0.003	0.5441	0.5237	0.5657

ISO 9001

RoHS
REACH SVHC
MSDS

Transformer

application

Motor

application

Ignition coil

application

Voice Coil

application

Electrics

application

Relay

application
Enameled

Drawing

Enameled

Paint

Annealing

Enameled

Baking

Enameled

Cooling

company

Customer Oriented,Innovation brings more Value

RUIYUAN is a solution provider, which requires us to be more professional on wires, insulation material and your applications.

Ruiyuan has a heritage of innovation, along with advancements in enameled copper wire, our company has grown through an unwavering commitment to integrity, service and responsiveness to our customers.

We look forward to continuing to grow on the basis of quality, innovation and service.

company
company

7-10 days Average delivery time.
90% European and North American customers. Such as PTR,ELSIT, STS etc.
95% Repurchase rate
99.3% Satisfaction rate. Class A supplier verified by German customer.

Product detail pictures:

Factory Supply Super Thin Copper Wire For Coil Winding - 0.05mm Enameled Copper Wire for Ignition Coil – Ruiyuan

Short Description:

Product Detail

Product Tags

Related Video

Feedback (2)

Transformer

Motor

Ignition coil

Voice Coil

Electrics

Relay

Drawing

Paint

Annealing

Baking

Cooling

Products categories

OEM/ODM Factory Custom Enameled Rectangular Mag...

OEM Manufacturer Enameled Rectangular Magnet Wi...

OEM Factory for High Temperature Rectangualr Co...

Cheap price PI Film Profiled Litz Wire - High ...

Hot New Products Copper Adhesive Flat Wire - C...

High Quality Motor Winding Wire - EIW 180 Poly...

Sintered Enamel-Coated Flat Copper Wire G...

Launch of Zhongxing 10R Satellite: Poten...

Visiting Jiangsu Baiwei, Changzhou Zhouda...

The Revitalization of All Things: Beginni...

Welcoming God of Wealth(Plutus) on the S...