Featured
-
Professional China Teflon Insulated Copper Magnet Wire - Class B / F Triple Insulated Wire 0.40mm TIW Solid Copper Winding Wire – Ruiyuan
TIW-B/F/H, thermal class from 130-180 with such features Solderability: TIW CLASS B and F can be soldered directly, class H need to peal off Size range: 0.13-1.0mm operation voltage 1000Vms Soldering temperature: 420-470 ℃ Breakdown voltage: Up to 17KV Solvent resistance: Great performance of chemical solvent and insulating paint resistance Fast Winding capacity Complies with UL-2353, VDE, IEC60950/61558 and CQC safety regulation Conforms EU RoHS 2.0, HF and REACH environment requirement... -
Manufacturing Companies for Copper Adhesive Magnet Wire - Class 180 Hot air self-adhesive magnet winding copper wire – Ruiyuan
SBEIW Heat-resistant self-bonding enameled copper wire with composite coatings can be used for winding when they are activated by baking or electric heating to make bond coat of the wire attached to each other and shape the wire into a whole automatically and compactly after cooling. Compared with ordinary enameled copper wire, they feature better flexibility. During winding or pull of tension, the film remains intact. SBEIW is also resistant to sulfuric acid, sodium hydroxide and other acid,... -
Wholesale Price Class 180 1.2mm*0.2mm UEW Hot Wind Self Bonding Enameled Copper Wire - EIAIW 180 4.00mmx0.40mm Custom Rectangular Enameled Copper Wire For Motor Winding – Ruiyuan
Meet the design requirements of lower height, smaller volume, lighter weight and higher power density electronic and motor productsInsulation is coated uniformly and adhesively .Good Insulation property and withstand voltage is more than 1000V. Under the same cross-sectional area, it has a larger surface area than the round enameled wire, which can effectively reduce the “skin effect”, reduce high-frequency current loss, and be more suitable for high-frequency conduction work. Com... -
China OEM USTC / UDTC Sole Covering Litz Wire - High Voltage 0.1mm*127 PI Insulation Taped Litz Wire – Ruiyuan
The taped litz wire refers to the reinforced insulating stranded wire that is wrapped with one or more insulating films outside the ordinary stranded wire according to a certain overlap rate. It has the advantages of good voltage resistance and high mechanical strength. The operating voltage of the litz wire is up to 10000V The working frequency can reach 500kHz, which can be widely used in various high-frequency and high-voltage electric energy conversion equipment. Test report for taped ... -
2022 High quality 43 AWG Plain Guitar Pickup Wire - 42 AWG Plain Enamel Vintage Guitar Pickup Winding Wire – Ruiyuan
AWG 42 (0.063mm) enameled copper wire Characteristics Technical requests Test Results Sample 1 Sample 2 Sample 3 Bare Wire Diameter 0.063±0.002 0.063 0.063 0.063 Conductor Resistance ≤ 5.900 Ω/m 5.478 5.512 5.482 Breakdown voltage ≥ 400 V 1768 1672 1723 At present, the diameter of the single wire of the litz wire we produce is 0.03 to 1.0 mm, the number of strands is 2 to 7000, and the maximum finished outer diameter is 12 mm. The thermal rating of individual wire is 155 degre... -
Wholesale Dealers of Copper Stranded Wire - High Voltage 0.1mm*127 PI Insulation Taped Litz Wire – Ruiyuan
The taped litz wire refers to the reinforced insulating stranded wire that is wrapped with one or more insulating films outside the ordinary stranded wire according to a certain overlap rate. It has the advantages of good voltage resistance and high mechanical strength. The operating voltage of the litz wire is up to 10000V The working frequency can reach 500kHz, which can be widely used in various high-frequency and high-voltage electric energy conversion equipment. Test report for taped ... -
Professional China Super Thin AIW/ UEW square Magnet Wire - SFT-AIW220 0.12×2.00 High temperature rectangular enameled copper wire – Ruiyuan
This custom-made wire SFT-AIW 0.12mm*2.00mm is 220°C corona resistant Polyamideimide enameled flat wire. The customer uses this wire on the drive motor of the new energy vehicle. As the heart of new energy vehicles, there are many magnet wires in the drive motor. If the magnet wire and insulating material cannot withstand the high voltage, high temperature and high voltage change rate during the operation of the motor, they will be easily broken down and reduce the service life of the motor. ... -
Factory Price 2 Strands Enamel Coil Wire Copper Twisted Litz Wire - High Voltage 0.1mm*127 PI Insulation Taped Litz Wire – Ruiyuan
The taped litz wire refers to the reinforced insulating stranded wire that is wrapped with one or more insulating films outside the ordinary stranded wire according to a certain overlap rate. It has the advantages of good voltage resistance and high mechanical strength. The operating voltage of the litz wire is up to 10000V The working frequency can reach 500kHz, which can be widely used in various high-frequency and high-voltage electric energy conversion equipment. Test report for taped ... -
Good Quality Triple Insulated Wire - Class B / F Triple Insulated Wire 0.40mm TIW Solid Copper Winding Wire – Ruiyuan
TIW-B/F/H, thermal class from 130-180 with such features Solderability: TIW CLASS B and F can be soldered directly, class H need to peal off Size range: 0.13-1.0mm operation voltage 1000Vms Soldering temperature: 420-470 ℃ Breakdown voltage: Up to 17KV Solvent resistance: Great performance of chemical solvent and insulating paint resistance Fast Winding capacity Complies with UL-2353, VDE, IEC60950/61558 and CQC safety regulation Conforms EU RoHS 2.0, HF and REACH environment requirement... -
Hot New Products Copper Adhesive Flat Wire - G1 0.04mm Enameled Copper Wire for Relay – Ruiyuan
Our Enameled Copper Wire for Relay consists of metal conductor core(bare copper wire) and a single coating of soldering polyurethane resin. The above-mentioned self-lubricating material is coated on the single coating and can cause skin effect. Enameled copper wire produced by existing technology is generally coated with a layer of liquid or solid lubricant on its surface. As friction coefficient on the surface is high, which is not suitable for high-speed automatic winding. For winding winde... -
Bottom price High Voltage FIW Enameled Wire - Class180 1.20×0.20mm Ultra-thin enameled flat copper wire – Ruiyuan
Test Report: 1.20mm*0.20mm AIW Hot Air Self-bonding Flat Wire Item Characteristics Standard Test Result 1 Appearance Smooth Equality Smooth Equality 2 Conductor Diameter(mm) Width 1.20±0.060 1.195 Thickness 0.20±0.009 0.197 3 Thickness of Insulation(mm) Width Min.0.010 0.041 Thickness Min.0.010 0.035 4 Overall Diameter (mm) Width Max.1.250 1.236 Thickness Max.0.240 0.232 5 Solderability 390℃ 5S Smooth with no draff OK 6 Pinhole(pcs/m) Max ≤3 0 7 Elongation(%) Min ≥30 ... -
China OEM Enameled Copper Magnet Wire - 0.011mm -0.025mm UEW Ultra-fine Enameled Copper Wire – Ruiyuan
The selection of copper wire as raw materials and the process of drawing play a key role in fine wire drawing. With the 0.80mm copper wire drawn to 0.011mm, it has to go through several procedures such as middle draw and annealing, small draw and anealing, fine draw and micro drawing with annealing, In order to ensure the softness of wire, copper wire needs to be annealed every time when its cross section is compressed by 90%. Copper wire after drawing must keep bright, oxidation, discolorat...