Featured
-
OEM Factory for High Temperature Rectangualr Copper Magnet Wire - AIW 220 0.3mm x 0.18mm Hot Wind Enameled Flat Copper Wire – Ruiyuan
Test Report: 0.30*0.18mm AIW Class 220℃ Hot Air Self-bonding Flat Wire Item Characteristics Standard Test Result 1 Appearance Smooth Equality Smooth Equality 2 Conductor Diameter(mm) Width 0.300 ±0.030 0.298 Thickness 0.180 ±0.005 0.180 3 Thickness of Insulation(mm) Width 0.010 ±0.005 0.011 Thickness 0.010 ±0.005 0.008 4 Overall Diameter (mm) Width Max.0.364 0.326 Thickness Max.0.219 0.201 5 Selfbonding Layer Thickness(mm) Min.0.002 0.003 6 Pinhole(pcs/m) Max ≤1 0 7 ... -
OEM Supply Custom UEW 180 Flat Enameled Copper Wire - EIAIW 180 4.00mmx0.40mm Custom Rectangular Enameled Copper Wire For Motor Winding – Ruiyuan
Meet the design requirements of lower height, smaller volume, lighter weight and higher power density electronic and motor productsInsulation is coated uniformly and adhesively .Good Insulation property and withstand voltage is more than 1000V. Under the same cross-sectional area, it has a larger surface area than the round enameled wire, which can effectively reduce the “skin effect”, reduce high-frequency current loss, and be more suitable for high-frequency conduction work. Com... -
Factory Cheap Hot TIW - Class B / F Triple Insulated Wire 0.40mm TIW Solid Copper Winding Wire – Ruiyuan
TIW-B/F/H, thermal class from 130-180 with such features Solderability: TIW CLASS B and F can be soldered directly, class H need to peal off Size range: 0.13-1.0mm operation voltage 1000Vms Soldering temperature: 420-470 ℃ Breakdown voltage: Up to 17KV Solvent resistance: Great performance of chemical solvent and insulating paint resistance Fast Winding capacity Complies with UL-2353, VDE, IEC60950/61558 and CQC safety regulation Conforms EU RoHS 2.0, HF and REACH environment requirement... -
Manufacturer of Self Bonding Copper Wire High Temperature - HTW High Tension Enameled Copper Wire – Ruiyuan
As electronic products tend to be small-sized, there’ re higher requirements for super fine magnet wires. Not only light weight and thin diameter is required, but also increase of power. We need to take the property of fine wires that are easily broken during the winding. Taking into account other characteristics, copper alloys combined with other components is used to improve tension and for the purpose of that decrease in electrical conductivity is not too large. Conductor made of copper-ba... -
Manufacturer for Class B Triple Insulated Wire For Motor Windings - Class B / F Triple Insulated Wire 0.40mm TIW Solid Copper Winding Wire – Ruiyuan
TIW-B/F/H, thermal class from 130-180 with such features Solderability: TIW CLASS B and F can be soldered directly, class H need to peal off Size range: 0.13-1.0mm operation voltage 1000Vms Soldering temperature: 420-470 ℃ Breakdown voltage: Up to 17KV Solvent resistance: Great performance of chemical solvent and insulating paint resistance Fast Winding capacity Complies with UL-2353, VDE, IEC60950/61558 and CQC safety regulation Conforms EU RoHS 2.0, HF and REACH environment requirement... -
2022 wholesale price Square Copper Winding Wire - EIAIW 180 4.00mmx0.40mm Custom Rectangular Enameled Copper Wire For Motor Winding – Ruiyuan
Meet the design requirements of lower height, smaller volume, lighter weight and higher power density electronic and motor productsInsulation is coated uniformly and adhesively .Good Insulation property and withstand voltage is more than 1000V. Under the same cross-sectional area, it has a larger surface area than the round enameled wire, which can effectively reduce the “skin effect”, reduce high-frequency current loss, and be more suitable for high-frequency conduction work. Com... -
High reputation 44 AWG 0.05mm Polysol Guitar Pickup Wire - 43 0.056mm Polysol Guitar Pickup Wire – Ruiyuan
Polysol coating, master’ s Choice “On most pickups, I use poly-coated coil wire for its consistency, durability and overall clear sound.” —Erick Coleman, repairman and StewMac tech advisor Polysol enamel, widely used for pickup wire enamel, can be soldered. Normally it’ s transparent. But it could be brown-violet if a “vintage” vibe is required. Numerous colors are available for customization, blue, pink, red, you name it. Rvyuan 43 AWG polysol coated guitar pickup wir... -
Hot New Products Motor Winding Copper Wire - 0.05mm Enameled Copper Wire for Ignition Coil – Ruiyuan
The working principle of automobile ignition coil is to convert low voltage of DC power to high voltage of DC by inversion and dual voltage rectification which passes through the primary of the ignition coil intermittently. A high voltage is induced in the secondary of the ignition coil ( Generally around 20KV) and then it drives the spark plug of ignition coil to discharge for ignition. It’s difficult to control some properties of conventional enameled wire for automotive ignition coils as b... -
Hot New Products 43 AWG 0.056mm Plain Enamel Copper Wire For Vintage Style Guitar Pickup - 43 AWG Plain Vintage Guitar Pickup Wire – Ruiyuan
• Plain Enamel • Polysol enamel • Heavy formvar enamel AWG 43 plain (0.056mm) plain guitar pickup wire Characteristics Technical requests Test Results Sample 1 Sample 2 Sample 3 Surface Good OK OK OK Bare Wire Diameter 0.056±0.001 0.056 0.0056 0.056 Conductor Resistance 6.86-7.14 Ω/m 6.98 6.98 6.99 Breakdown voltage ≥ 1000V 1325 Guitar pickup wire has a certain natural resistivity, the longer the guitar pickup wire, the greater the resistance. The thickness of the wire also... -
Wholesale Price China High Frequency Copper Litz Wire - High Voltage 0.1mm*127 PI Insulation Taped Litz Wire – Ruiyuan
The taped litz wire refers to the reinforced insulating stranded wire that is wrapped with one or more insulating films outside the ordinary stranded wire according to a certain overlap rate. It has the advantages of good voltage resistance and high mechanical strength. The operating voltage of the litz wire is up to 10000V The working frequency can reach 500kHz, which can be widely used in various high-frequency and high-voltage electric energy conversion equipment. Test report for taped ... -
2022 Good Quality Copper Wire For Coil Winding - Class 180 Hot air self-adhesive magnet winding copper wire – Ruiyuan
SBEIW Heat-resistant self-bonding enameled copper wire with composite coatings can be used for winding when they are activated by baking or electric heating to make bond coat of the wire attached to each other and shape the wire into a whole automatically and compactly after cooling. Compared with ordinary enameled copper wire, they feature better flexibility. During winding or pull of tension, the film remains intact. SBEIW is also resistant to sulfuric acid, sodium hydroxide and other acid,... -
Best quality Enameled Copper Wire - AIW 220 0.3mm x 0.18mm Hot Wind Enameled Flat Copper Wire – Ruiyuan
Test Report: 0.30*0.18mm AIW Class 220℃ Hot Air Self-bonding Flat Wire Item Characteristics Standard Test Result 1 Appearance Smooth Equality Smooth Equality 2 Conductor Diameter(mm) Width 0.300 ±0.030 0.298 Thickness 0.180 ±0.005 0.180 3 Thickness of Insulation(mm) Width 0.010 ±0.005 0.011 Thickness 0.010 ±0.005 0.008 4 Overall Diameter (mm) Width Max.0.364 0.326 Thickness Max.0.219 0.201 5 Selfbonding Layer Thickness(mm) Min.0.002 0.003 6 Pinhole(pcs/m) Max ≤1 0 7 ...