Featured
-
PriceList for 0.02 Mm Copper Winding Wire - 0.05mm Enameled Copper Wire for Ignition Coil – Ruiyuan
The working principle of automobile ignition coil is to convert low voltage of DC power to high voltage of DC by inversion and dual voltage rectification which passes through the primary of the ignition coil intermittently. A high voltage is induced in the secondary of the ignition coil ( Generally around 20KV) and then it drives the spark plug of ignition coil to discharge for ignition. It’s difficult to control some properties of conventional enameled wire for automotive ignition coils as b... -
Factory wholesale Copper Litz Wire - High Voltage 0.1mm*127 PI Insulation Taped Litz Wire – Ruiyuan
The taped litz wire refers to the reinforced insulating stranded wire that is wrapped with one or more insulating films outside the ordinary stranded wire according to a certain overlap rate. It has the advantages of good voltage resistance and high mechanical strength. The operating voltage of the litz wire is up to 10000V The working frequency can reach 500kHz, which can be widely used in various high-frequency and high-voltage electric energy conversion equipment. Test report for taped ... -
Professional China Teflon Insulated Copper Magnet Wire - Class B / F Triple Insulated Wire 0.40mm TIW Solid Copper Winding Wire – Ruiyuan
TIW-B/F/H, thermal class from 130-180 with such features Solderability: TIW CLASS B and F can be soldered directly, class H need to peal off Size range: 0.13-1.0mm operation voltage 1000Vms Soldering temperature: 420-470 ℃ Breakdown voltage: Up to 17KV Solvent resistance: Great performance of chemical solvent and insulating paint resistance Fast Winding capacity Complies with UL-2353, VDE, IEC60950/61558 and CQC safety regulation Conforms EU RoHS 2.0, HF and REACH environment requirement... -
High Quality for Polyester Covered Stranded Copper Litz Wire - High Voltage 0.1mm*127 PI Insulation Taped Litz Wire – Ruiyuan
The taped litz wire refers to the reinforced insulating stranded wire that is wrapped with one or more insulating films outside the ordinary stranded wire according to a certain overlap rate. It has the advantages of good voltage resistance and high mechanical strength. The operating voltage of the litz wire is up to 10000V The working frequency can reach 500kHz, which can be widely used in various high-frequency and high-voltage electric energy conversion equipment. Test report for taped ... -
Chinese wholesale Custom 41.5 AWG 0.065mm Plain Guitar Pickup Wire - 44 AWG 0.05mm Green Polysol Coated Guitar Pickup Wire – Ruiyuan
Specification of AWG 44 0.05mm Polysol Pickup Wire Test Item Standard Value Test Result Conductor Diameter 0.050±0.002mm 0.050mm Thickness of insulation Min. 0.007 0.0094mm Overall diameter Max. 0.060mm 0.0594mm Continuity of covering(50V/30m) Max. 60 pcs Max. 0 pcs Breakdown voltage Min. 400V Min. 1,628V Resistance to softening Continue 2 times pass 230℃/Good Solder test(390℃±5℃) Max. 2s Max. 1.5s D.C Electrical resistance(20℃) 8.6-9.0 Ω/m 8.80 Ω/m Elongation Min. 12% 23... -
Factory Cheap Hot TIW - Class B / F Triple Insulated Wire 0.40mm TIW Solid Copper Winding Wire – Ruiyuan
TIW-B/F/H, thermal class from 130-180 with such features Solderability: TIW CLASS B and F can be soldered directly, class H need to peal off Size range: 0.13-1.0mm operation voltage 1000Vms Soldering temperature: 420-470 ℃ Breakdown voltage: Up to 17KV Solvent resistance: Great performance of chemical solvent and insulating paint resistance Fast Winding capacity Complies with UL-2353, VDE, IEC60950/61558 and CQC safety regulation Conforms EU RoHS 2.0, HF and REACH environment requirement... -
PriceList for Winding Enameled Wire - G1 0.04mm Enameled Copper Wire for Relay – Ruiyuan
Our Enameled Copper Wire for Relay consists of metal conductor core(bare copper wire) and a single coating of soldering polyurethane resin. The above-mentioned self-lubricating material is coated on the single coating and can cause skin effect. Enameled copper wire produced by existing technology is generally coated with a layer of liquid or solid lubricant on its surface. As friction coefficient on the surface is high, which is not suitable for high-speed automatic winding. For winding winde... -
Manufacturer for 44 AWG Magnet Wire Plain Enamel Guitar Pickup Wire - 44 AWG 0.05mm Plain SWG- 47 / AWG- 44 Guitar Pickup Wire – Ruiyuan
Plain Enamel Magnet Wire for Guitar Pickup was designed back to around 80 years. Nowadays it’ s still popular and loved by lots of instrumental fans. Rvyuan plain enamel wire is fitted to vintage pickups from the 50s and 60s. Most luthiers’ favorite choice to repair broken guitar pickups or wind a new pickup. When pickups are made with Rvyuan plain enameled wire, which has a thinner coating than heavy formvar enameled wire, there is no longer as much ‘air’ in the pickup. If you in... -
PriceList for Magnetic Coil Winding Wire - HTW High Tension Enameled Copper Wire – Ruiyuan
As electronic products tend to be small-sized, there’ re higher requirements for super fine magnet wires. Not only light weight and thin diameter is required, but also increase of power. We need to take the property of fine wires that are easily broken during the winding. Taking into account other characteristics, copper alloys combined with other components is used to improve tension and for the purpose of that decrease in electrical conductivity is not too large. Conductor made of copper-ba... -
PriceList for Polysol Guitar Pickup Wire - 41AWG 0.071mm Heavy formvar guitar pikcup wire – Ruiyuan
99.99% pure copper as raw material Heavy Formvar coated, stringent control over the thickness of insulation Gold color improves overall brightness and cannot be soldered Suitable for both machine winding and hand winding Style: Blues, Rock, Classic Rock, Country, Pop, and Jazz Test Item Standard Value Test Result Conductor Diameter 0.071±0.002mm 0.0710mm Thickness of insulation Min. 0.007 0.011mm Overall diameter Max. 0.085mm 0.0820mm Continuity of coating (60hole/30m) 0 0 Br... -
Lowest Price for Self Bonding Stranded Copper Wire - High Voltage 0.1mm*127 PI Insulation Taped Litz Wire – Ruiyuan
The taped litz wire refers to the reinforced insulating stranded wire that is wrapped with one or more insulating films outside the ordinary stranded wire according to a certain overlap rate. It has the advantages of good voltage resistance and high mechanical strength. The operating voltage of the litz wire is up to 10000V The working frequency can reach 500kHz, which can be widely used in various high-frequency and high-voltage electric energy conversion equipment. Test report for taped ... -
8 Year Exporter Self Bonding Winding Wire - 0.011mm -0.025mm UEW Ultra-fine Enameled Copper Wire – Ruiyuan
The selection of copper wire as raw materials and the process of drawing play a key role in fine wire drawing. With the 0.80mm copper wire drawn to 0.011mm, it has to go through several procedures such as middle draw and annealing, small draw and anealing, fine draw and micro drawing with annealing, In order to ensure the softness of wire, copper wire needs to be annealed every time when its cross section is compressed by 90%. Copper wire after drawing must keep bright, oxidation, discolorat...