Products
-
Class 130 155 180 Yellow TIW Triple insulated winding wire
Triple insulated wire or three layers insulated wire is a kind of winding wire but with three extruded insulation layers in safety standards around the circumference of the conductor.
Triple insulated wire(TIW) are used in switched mode power supplies and realize miniaturization and cost reductions as no insulation tape or barrier tape is required between the primary and secondary windings of the transformers. Multiple thermal class options: class B(130), Class F(155), Class H(180) satisfy most applications.
-
SFT-EIAIW 5.0mm x 0.20mm High Temperature Rectangular Enameled Copper Winding Wire
The enameled flat wire is an enameled wire with a rectangular conductor with an R angle. It is described by parameters such as conductor narrow boundary value, conductor wide boundary value, paint film heat resistance grade and paint film thickness and type. The conductors can be copper, copper alloys or CCA copper clad aluminum.
-
SFT-AIW220 0.12×2.00 High Temperature Rectangular Enameled Copper Wire
Enamelled flat wire refers to the winding wire obtained by drawing, extruding and rolling through a certain specification of mold by using an enameled round copper wire, and then coated with insulating varnish for many times.
Including enameled copper flat wire, enameled aluminum flat wire… -
EIAIW 180 4.00mmx0.40mm Custom Rectangular Enameled Copper Wire For Motor Winding
Custom Product Introduction
This custom-made wire 4.00*0.40 is 180°C Polyesterimide copper flat wire. The customer uses this wire on the high-frequency motor. Compared with the enameled round wire, the cross-sectional area of this flat wire has a larger cross-sectional area, and its heat dissipation area is also increased accordingly, and the heat dissipation effect is significantly improved. At the same time, it can greatly improve the “skin effect”, thereby reducing the loss of high-frequency motor. Improved efficiency for customers. -
Custom PEEK wire, rectangular enameled copper winding wire
The current enameled rectangular wires are suitable for most applications, however still some shortages in some specific requirements:
Higher thermal class over 240C,
Excellent solvent resistant capacity especially immerse the wire into the water or oil completely for long time.
The both requirements are typical demand of new energy car. Therefore, we found the material PEEK to combine our wire together to satisfy the such demand. -
Class180 1.20mmx0.20mm Ultra-thin enameled flat copper wire
The flat enameled copper wire is different from the traditional round enameled copper wire. It is compressed into a flat shape at the initial stage, and then coated with insulating paint, thus ensuring the good insulation and corrosion resistance of the wire surface. Furthermore, compared with copper round wire, enameled copper flat wire also has major breakthroughs in current carrying capacity, transmission speed, heat dissipation performance and occupied space volume.
Standard: NEMA, IEC60317,JISC3003,JISC3216 or customized
-
AIWSB 0.5mm x1.0mm Hot Wind Self Bonding Enameled Copper Flat Wire
In fact, flat enameled copper wire refers to a rectangular enameled copper wire, which consists of a width value and a thickness value. The specifications are described as:
Conductor thickness (mm) x conductor width (mm) or conductor width (mm) x conductor thickness (mm) -
AIW220 2.2mm x0.9mm High Temperature Rectangular Enameled Copper Wire Flat Winding Wire
The advancement of science and technology has made the volume of electronic components continue to shrink. Motors weighing dozens of pounds can also be reduced and installed on disk drives. With the miniaturization of electronic appliances and other products, miniaturization has become the trend of the times. It is against the background of this era that the demand for fine enameled copper flat wire is also increasing day by day.
-
AIW 220 0.3mm x 0.18mm Hot Wind Enameled Flat Copper Wire
Advances in science and technology have allowed electronic components to shrink in size. Motors weighing tens of pounds can now be shrunk and mounted on disk drives. The miniaturization of electronic appliances and other products has become the order of the day. It is in this context that the demand for fine enameled copper flat wire is increasing day by day.
-
5mmx0.7mm AIW 220 Rectangular Flat Enameled Copper Wire For Automotive
Flat or rectangular enameled copper wire that is only shape change in comparison with round enameled copper from its appearance, however the rectangular wires have the advantage of allowing more compact windings, thereby delivering both space and weight savings. The electrical efficiency is also better, which saves energy.
-
0.14mm*0.45mm Ultra-thin Enameled Flat Copper Wire AIW Self Bonding
Flat enameled wire refers to the wire obtained by the oxygen-free copper rod or round copper wire after passing through a mold of a certain specification, after being drawn, extruded or rolled, and then coated with insulating varnish for many times.The “flat” in flat enameled wire refers to the shape of the material. Compared with enameled round copper wire and enameled hollow copper wire, flat enameled wire has very good insulation and corrosion resistance.
The conductor size of our wire products is precise, the paint film is evenly coated, the insulating properties and winding properties is good, and the bending resistance is strong, the elongation can reach more than 30%, and the temperature class up to 240 ℃. The wire has a complete range of specifications and models, about 10,000 kinds, and also supports customization according to customer’s design.
-
0.5mm x 32 High Frequency Multipel Stranded Wire Copper Litz Wire
Litz wire is composed of multiple strands of enameled copper wire and twisted together. According to different applications, there are a variety of different insulating magnet wire choices, forming many circumferential surfaces, achieving a layer effect, reducing high-frequency resistance, and increasing the Q value, which is easier to design high-voltage, high-frequency coils. Our wire have passed multiple certifications，IS09001/IS014001/IATF16949/UL/RoHS/REACH