Enameled Magnet Winding Wire
-
FIW4 Wire 0.335mm Class 180 High Voltage Enameled Copper Wire
FIW enameled wire is a high-quality wire with full insulation and weldability (zero defect). The diameter of this wire is 0.335mm, and the temperature resistance level is 180 degrees.
FIW enameled wire can withstand high voltage, which makes it an alternative to traditional TIW wire, and the price is more economical.
-
2UEW 180 0.14mm Round Enameled Copper Winding Wire For Transformer
Enameled copper wire is a commonly used wire material. Its core is copper wire as a conductor, and polyurethane paint is used as a protective layer around it. Enameled wire has the properties of insulation and high temperature resistance, and is widely used in various fields.
-
Ultra Thin 0.025mm Class 180℃ SEIW Polyester-imide Solderable Insulated Round Enameled Copper Wire For Electric Motors
SEIW wire is an enameled copper wire with polyester-imide insulating layer. The temperature resistance grade is 180℃. Insulation of SEIW can be soldered directly without removing the insulating layer by manual or chemical methods, it make the soldering process simple, reduce the manufacturing cost and improves the efficiency. In addition,it has high temperature resistance, good adhesion of insulation layer and conductor, meet the requirements of winding that soldering and high heat resistance.
-
0.05mm Enameled Copper Wire for Ignition Coil
G2 H180
G3 P180
This product is UL certified, and the temperature rating is 180 degrees H180 P180 0UEW H180
G3 P180
Diameter range: 0.03mm—0.20mm
Applied standard: NEMA MW82-C, IEC 60317-2 -
0.05mm 2UEW/3UEW155/180 Enameled Copper Wire for Ignition Coil
G2 H180
G3 P180
This product is UL certified, and the temperature rating is 180 degrees H180 P180 0UEW H180
G3 P180
Diameter range: 0.03mm—0.20mm
Applied standard: NEMA MW82-C, IEC 60317-2 -
0.011mm -0.025mm 2UEW155 Ultra-fine Enameled Copper Wire
As electronic products in market tend to be small-sized and sophisticated, enameled copper wire, a vital material for electronic products, is getting thinner and thinner. With nearly 20 years of accumulated experience in magnet wire technology, the finest diameter that we make is 0.011mm, which is close to one-seventh of human hair. To produce such a wire with fine diameter, we need to confront with great difficulties in drawing and painting of copper conductor. Ultra-fine enameled copper wire is our best-selling products in our target market.
-
0.028mm – 0.05mm Ultra Thin Enameled Magnet Winding Copper Wire
We have been specializing in production of enameled copper wires over two decades, and have made great achievements in the field of fine wires. The sizes range starts from 0.011mm that represent the most advanced technology and best material.
Geographical distribution of our customers is all over the world, mainly in Europe. Our enameled copper wire is widely used in different fields, such as medical device,detectors, high and low frequency transformers, relays, micro motors, ignition coils -
G1 0.04mm Enameled Copper Wire for Relay
Enameled Copper Wire for Relay is a new type of enameled wire with characteristics of heat resistance and self lubricating . Its insulation not only remains features of heat resistance and soldering ability and but also improve reliability of relay by covering lubricating materials outside.
-
0.038mm Class 155 2UEW Polyurethane Enameled Copper Wire
This product is UL certified. Temperature rating can be 130 degrees, 155 degrees and 180 degrees respectively. Chemical composition of UEW insulation is Polyisocyanate.
Applied standard: IEC 60317-2/4 JIS C3202.6 MW75-C,79,82 -
0.071mm Enameled Copper Wire for Electric Motor Winding
Enameled Copper Wire for Electric Motor produced by our company has good performance to resist high heat, abrasion, and corona.
-
EIW 180 Polyedster-imide 0.35mm Enamelled copper wire
UL Certified Product Thermal Class 180C
Conductor Diameter Range: 0.10mm—3.00mm -
FIW 6 0.13mm Soldering Class 180 Fully Insulated Enameled Wire
Fully insulated enameled wire is an insulated wire that can replace TIW (triple insulated wire) for the production of transformers. All Rvyuan FIW wire passes VDE and UL certification, complying with IEC60317-56/IEC60950 U terms and NEMA MW85-C. It can withstand high voltage and features easy winding to meet customers’ demands. We are providing FIW ranging from 0.04mm to 0.4mm. Please feel free to contact us if you need it!
