Products

  • 0.05mm 2UEW/3UEW155/180 Enameled Copper Wire for Ignition Coil

    0.05mm 2UEW/3UEW155/180 Enameled Copper Wire for Ignition Coil

    G2 H180
    G3 P180
    This product is UL certified, and the temperature rating is 180 degrees H180 P180 0UEW H180
    G3 P180
    Diameter range: 0.03mm—0.20mm
    Applied standard: NEMA MW82-C, IEC 60317-2

  • 0.25mm Hot Air Self Bonding Enameled Copper Wire

    0.25mm Hot Air Self Bonding Enameled Copper Wire

    Self-adhesive or self-bonding enameled copper wire, namely a magnet wire that spontaneously adheres together given certain external conditions (heat or alcohol fusion).

  • 0.011mm -0.025mm 2UEW155 Ultra-fine Enameled Copper Wire

    0.011mm -0.025mm 2UEW155 Ultra-fine Enameled Copper Wire

    As electronic products in market tend to be small-sized and sophisticated, enameled copper wire, a vital material for electronic products, is getting thinner and thinner. With nearly 20 years of accumulated experience in magnet wire technology, the finest diameter that we make is 0.011mm, which is close to one-seventh of human hair. To produce such a wire with fine diameter, we need to confront with great difficulties in drawing and painting of copper conductor. Ultra-fine enameled copper wire is our best-selling products in our target market.

  • Class 180 Hot air self-adhesive magnet winding copper wire

    Class 180 Hot air self-adhesive magnet winding copper wire

    SBEIW Heat-resistant self-bonding enameled copper wire with composite coatings can be used for winding when they are activated by baking or electric heating to make bond coat of the wire attached to each other and shape the wire into a whole automatically and compactly after cooling.

  • 0.028mm – 0.05mm Ultra Thin Enameled Magnet Winding Copper Wire

    0.028mm – 0.05mm Ultra Thin Enameled Magnet Winding Copper Wire

    We have been specializing in production of enameled copper wires over two decades, and have made great achievements in the field of fine wires. The sizes range starts from 0.011mm that represent the most advanced technology and best material.
    Geographical distribution of our customers is all over the world, mainly in Europe. Our enameled copper wire is widely used in different fields, such as medical device,detectors, high and low frequency transformers, relays, micro motors, ignition coils

  • HCCA 2KS-AH 0.04mm Self Bonding Enameled Copper Wire f

    HCCA 2KS-AH 0.04mm Self Bonding Enameled Copper Wire f

    Both pure copper and copper clad with aluminum can both be used as conductor for wire when there’ s different needs of tone quality. Study shows that higher purity of copper is beneficial to improve sound quality. It can be seen that pure 4N (99.99%) copper is usually adopted in the market.

  • 0.038mm Class 155 2UEW Polyurethane Enameled Copper Wire

    0.038mm Class 155 2UEW Polyurethane Enameled Copper Wire

    This product is UL certified. Temperature rating can be 130 degrees, 155 degrees and 180 degrees respectively. Chemical composition of UEW insulation is Polyisocyanate.
    Applied standard: IEC 60317-2/4 JIS C3202.6 MW75-C,79,82

  • 0.071mm Enameled Copper Wire for Electric Motor Winding

    0.071mm Enameled Copper Wire for Electric Motor Winding

    Enameled Copper Wire for Electric Motor produced by our company has good performance to resist high heat, abrasion, and corona.

  • EIW 180 Polyedster-imide 0.35mm Enamelled  copper wire

    EIW 180 Polyedster-imide 0.35mm Enamelled copper wire

    UL Certified Product Thermal Class 180C
    Conductor Diameter Range: 0.10mm—3.00mm

  • Class 180 Fully Insulated (Zero Defect) Solderable Round Enameled Copper Wire

    Class 180 Fully Insulated (Zero Defect) Solderable Round Enameled Copper Wire

    The FIW enameled wire manufactured by Rvyuan has high temperature rating and zero defect and reinforces insulation. It applies standards of IEC60317-56/IEC60950 U. Strong capability of withstanding high voltage meet the needs of electronic products for thin diameter, easy winding and low costs.

  • 0.05mm Enameled Copper Wire for Ignition Coil

    0.05mm Enameled Copper Wire for Ignition Coil

    G2 H180
    G3 P180
    This product is UL certified, and the temperature rating is 180 degrees H180 P180 0UEW H180
    G3 P180
    Diameter range: 0.03mm—0.20mm
    Applied standard: NEMA MW82-C, IEC 60317-2

  • 44 AWG 0.05mm Green Poly Coated Guitar Pickup Wire

    44 AWG 0.05mm Green Poly Coated Guitar Pickup Wire

    Rvyuan has been “Class A” provider for guitar pickup craftsmen and pickups makers around the world over two decades. Apart from universally used AWG41, AWG42, AWG43 and AWG44, we also help our customers explore new tones with different sizes on their requests, such as 0.065mm, 0.071mm etc. Most popular material at Rvyuan is copper, there are also pure silver, gold wire, silver plated wire available if you need.

    If you want to build your own configuration or style for pickups, don’ t hesitate to get these wires.
    They won’ t let you down but bring you great clarity and cut through. Rvyuan poly coated magnet wire for pickups gives your pickups a stronger tone than vintage wind.