Self bonding wire
-
0.17mm Hot Air Self Bonding Enameled Copper Wire for Speaker Winding
Self-adhesive enamelled copper wire is a high-performance wire.
In the electronics industry, this self-adhesive enamelled copper wire is widely used in various fields, such as home appliance manufacturing, electronic equipment manufacturing, automobile manufacturing, etc.
-
AIW220 1.0mm*0.25mm Hot Wind Self-adhesive Flat / Rectangular Enameled Copper Wire
Self-adhesive enamelled flat copper wire is a unique wire product with many outstanding advantages and a wide range of applications.
This hot-air self-adhesive rectangular enameled copper wire has a width of 1mm and a thickness of 0.25mm. It is a flat wire especially suitable for high-temperature environments, and its temperature resistance has reached 220 degrees.
-
2UEW-F Hot Wind Self-adhesive Super Thin Enameled Copper Wire
This wire is a high-quality enamelled copper wire with a wire diameter of 0.016mm, the temperature resistance level reaches 155℃.
We also provide self-adhesive wire, including hot air self-adhesive type and alcohol self-adhesive type.
-
44 AWG 0.05mm 2UEW155 Self-adhesive Bondcoat Enameled Copper Wire
Self-adhesive enamelled copper wire is a high-performance wire with many unique advantages and a wide range of applications.
This is a hot air type self-adhesive wire with a diameter of 0.05mm, we also provide alcohol self-adhesive wires to meet the needs of different customers.
We can also produce ultra-fine enameled wires with smaller diameters according to your needs.
-
0.03mm Super Thin Hot Wind / Solvent Self Adhesive Enameled Copper Winding Wire
Self adhesive enamelled copper wire is a high-quality wire product with a wire diameter of 0.03mm, which is favored for its unique characteristics and wide application fields.
Our products provide two options of hot air self-adhesive enameled wire and alcohol type enameled wire.
Hot air self-adhesive enameled wire is the main recommended model because of its environmental protection features and excellent performance.
-
2UEW155 / 180 40 AWG 0.08mm Hot Wind Self-adhesive Enameled Copper Winding Wire
This hot air self-adhesive enamelled copper wire has a wide range of characteristics and application scenarios. It can be used not only in high-end audio equipment, voice coils and other electronic equipment, but also in general circuit connection and transmission.
-
AIW220 Solvent Adhesive 0.11mm*0.26mm Rectangular Enameled Copper Winding Wire
Enameled rectangular copper wire is widely used in various fields. This Enameled rectangular copper wire we launched is especially suitable for voice coil production, with a width of 0.26mm and a thickness of 0.11mm, and a Polyamide imide insulation layer, solvent bonded, which has very high performance.
-
AIW Special Ultra-thin 0.15mm*0.15mm Self Bonding Enameled Square Wire
Enameled copper flat wire is a bare copper flat wire obtained after round copper wire is drawn, extruded or rolled by a die, and then coated with insulating varnish for many times. The surface layer of the painted flat copper wire has good insulation and corrosion resistance. Compared with the ordinary round-section enameled wire, the enameled flat wire has excellent current carrying capacity, transmission speed, heat dissipation performance and occupied space volume. performance.
-
Self Bonding AIW 2mm*0.2mm 200C Rectangular Enamel Copper Wire for Motor Winding
Other than round enameled copper wire, Ruiyuan also provides custom rectangular enamel copper wire. We are able to manufacture rectangular magnet wire coated with various enamels such as AIW, EI/AIW, PEEK, PIW, FP, UEW. At Ruiyuan, you are able to place an order with low minimum order quantity and superior quality. Over decades of accumulated experiences in the industry, Ruiyuan is able to provide 10,000 sizes of enameled rectangular copper wire.
-
0.25mm Hot Air Self Bonding Enameled Copper Wire
Self-adhesive or self-bonding enameled copper wire, namely a magnet wire that spontaneously adheres together given certain external conditions (heat or alcohol fusion).
-
Class 180 Hot air self-adhesive magnet winding copper wire
SBEIW Heat-resistant self-bonding enameled copper wire with composite coatings can be used for winding when they are activated by baking or electric heating to make bond coat of the wire attached to each other and shape the wire into a whole automatically and compactly after cooling.
-
AIWSB 0.5mm x1.0mm Hot Wind Self Bonding Enameled Copper Flat Wire
In fact, flat enameled copper wire refers to a rectangular enameled copper wire, which consists of a width value and a thickness value. The specifications are described as:
Conductor thickness (mm) x conductor width (mm) or conductor width (mm) x conductor thickness (mm)