Litz wire
-
0.06mm *400 2UEW-F-PI Film High Voltage Copper Taped Litz Wire For Motor Winding
There are mainly 3 series of litz wire to which we committed ourselves for decades, comprised of normal litz wire, taped litz wire and served litz wire with an annual output of more than 2,000 tons. Our Taped Litz Wire products have spread out all over the world, including European countries, Japan, Australia, Russia and other countries. Our taped litz wire can work at max. 10,000V of voltage. They are widely used in devices in need of high frequency and high voltage power conversion.
-
0.4mm*24 High Frequency Mylar Litz Wire PET Taped Litz Wire
Breif introduction: This is a customized taped litz wire, because the outer layer is covered with PET film, it is also called Mylar litz wire. The myar litz wire is composed of 24 strand of 0.4 mm enameled copper round wires, and the temperature resistance level is 155 degrees. The maximum outer diameter of the mylar litz wire is 0.439 mm, a minimum breakdown voltage of 4000V, and overlap of the outer PET film reaches 50%.
-
0.1mm*500 PET Mylar Litz Wire Enameled Copper Taped Litz Wire
which uses 2UEW enameled round copper wire with a single wire diameter of 0.1mm (38AWG), a total of 500 strands, and a temperature resistance level of 155 degrees. This PET taped litz wire is an electromagnetic wire formed by retaliating a layer of Mylar film on the outside of the enameled stranded cooper wire according to a certain overlap rate. The thickness of the Mylar film is 0.025mm, and the overlap rate reaches 52%. It increases the insulation voltage of the wire and also acts as a shield. In this way, the Mylar litz wire has good high frequency performance, high insulation strength and good heat resistance. The finished outer diameter of this taped ltiz wire is between 3.05mm and 3.18mm, and the breakdown voltage can reach 9400 volts. This wire can be used for high temperature, high voltage motor, transformer and instrument winding.
-
0.1mm*130 PET Film Copper Stranded Wire Mylar Litz Wire
At Rvyuan Wire, we equip ourselves with fine and sophisticated devices to manufacture taped Litz wire with superior quality. Taped Litz Wire, also called mylar litz wire, with a film wrapped outside, provide extra protection for the litz wire. Hence dielectric strength is strengthened. Flexibility and ability to cope with mechanical stress is enhanced as well. In some cases, taped litz wire can be a substitute for triple insulated wire in high frequency transformer. With breakdown voltage reaching up to 5KV, taped litz wire is suitable for application of operating frequency of 10kHz-5MHz and great loss of skin effect and proximity effect.
-
High Voltage 0.1mm*127 PI Insulation Taped Litz Wire
Taped litz wire 0.1mm*127 : This type of tape litz wire uses an enameled round copper wire with a single wire of 0.1mm (38awg), the temperature resistance rating is 180 degrees. The number of strands of this taped litz wire is 127, and it is wrapped with a golden PI film, which has good pressure resistance and high performance, and it also provides good electrical isolation.
-
High Voltage 0.1mm*127 PI Insulation Taped Litz Wire
Taped litz wire 0.1mm*127 : This type of tape litz wire uses an enameled round copper wire with a single wire of 0.1mm (38awg), the temperature resistance rating is 180 degrees. The number of strands of this taped litz wire is 127, and it is wrapped with a golden PI film, which has good pressure resistance and high performance, and it also provides good electrical isolation.