Products
-
0.4mm*24 High Frequency Mylar Litz Wire PET Taped Litz Wire
Breif introduction: This is a customized taped litz wire, because the outer layer is covered with PET film, it is also called Mylar litz wire. The myar litz wire is composed of 24 strand of 0.4 mm enameled copper round wires, and the temperature resistance level is 155 degrees. The maximum outer diameter of the mylar litz wire is 0.439 mm, a minimum breakdown voltage of 4000V, and overlap of the outer PET film reaches 50%.
-
0.1mm*500 PET Mylar Litz Wire Enameled Copper Taped Litz Wire
which uses 2UEW enameled round copper wire with a single wire diameter of 0.1mm (38AWG), a total of 500 strands, and a temperature resistance level of 155 degrees. This PET taped litz wire is an electromagnetic wire formed by retaliating a layer of Mylar film on the outside of the enameled stranded cooper wire according to a certain overlap rate. The thickness of the Mylar film is 0.025mm, and the overlap rate reaches 52%. It increases the insulation voltage of the wire and also acts as a shield. In this way, the Mylar litz wire has good high frequency performance, high insulation strength and good heat resistance. The finished outer diameter of this taped ltiz wire is between 3.05mm and 3.18mm, and the breakdown voltage can reach 9400 volts. This wire can be used for high temperature, high voltage motor, transformer and instrument winding.
-
0.1mm*130 PET Film Copper Stranded Wire Mylar Litz Wire
At Rvyuan Wire, we equip ourselves with fine and sophisticated devices to manufacture taped Litz wire with superior quality. Taped Litz Wire, also called mylar litz wire, with a film wrapped outside, provide extra protection for the litz wire. Hence dielectric strength is strengthened. Flexibility and ability to cope with mechanical stress is enhanced as well. In some cases, taped litz wire can be a substitute for triple insulated wire in high frequency transformer. With breakdown voltage reaching up to 5KV, taped litz wire is suitable for application of operating frequency of 10kHz-5MHz and great loss of skin effect and proximity effect.
-
42 AWG Plain Enamel Vintage Guitar Pickup Winding Wire
We supply some of the world’s guitar pickup craftsmen with wire custom made to order. They uses a wide variety of wire gauges in their pickups, most frequently in the 41 to 44 AWG range,the most common enameled copper wire size is 42 AWG.This plain enameled copper wire with blackish-purple coating is currently the best selling wire in our shop. This wire is generally used to make vintage style guitar pickups. We provide small packages, about 1.5kg per reel .
-
High Voltage 0.1mm*127 PI Insulation Taped Litz Wire
Taped litz wire 0.1mm*127 : This type of tape litz wire uses an enameled round copper wire with a single wire of 0.1mm (38awg), the temperature resistance rating is 180 degrees. The number of strands of this taped litz wire is 127, and it is wrapped with a golden PI film, which has good pressure resistance and high performance, and it also provides good electrical isolation.
-
High Voltage 0.1mm*127 PI Insulation Taped Litz Wire
Taped litz wire 0.1mm*127 : This type of tape litz wire uses an enameled round copper wire with a single wire of 0.1mm (38awg), the temperature resistance rating is 180 degrees. The number of strands of this taped litz wire is 127, and it is wrapped with a golden PI film, which has good pressure resistance and high performance, and it also provides good electrical isolation.