Litz wire
-
0.06mm x 1000 Film Wrapped Stranded Copper Enameled Wire Profiled Flat Litz Wire
Film wrapped profiled litz wire or Mylar wrapped shaped litz wire that is groups of enameled wire stranded together and then wrapped with polyester(PET) or Polyimide(PI)film,compressed into square or flat shape, which not only are characterized by increased dimensional stability and mechanical protection, but also greatly increased high voltage withstand.
Individual copper conductor diameter:0.06mm
Enamel coating: Polyurethane
Thermal rating:155/180
Cover: PET film
Number of strands:6000
MOQ:10KG
Customization: support
Max. overall dimension:
Min. breakdown voltage: 6000V
-
Customzied Braided Copper Wire Silk Covered Litz Wire
Braided silk wrapped litz wire is a new product that was launched to the market recently. The wire is trying to solve the problems of softness, adhesiveness and tension control in regular silk severed litz wire, that cause Performance deviation between idea design and real product. The braided silk severed layer is much more solid and softer in comparison with ordinary silk covered litz wire. And the roundness of the wire is better. Braided layer is also nylon or dacron, however that is braided by 16 strands of nylon at least,and the density is over 99%. Like ordinary silk wrapped litz wire, braided silk severed litz wire can be customized.
-
0.1mm*600 PI Insulation Copper Enameled Wire Profiled Litz Wire
This is the customized 2.0*4.0mm profiled Polyimide(PI)film wrapped with diameter of single wire 0.1mm/AWG38, and 600strands
-
Customized USTC Copper Conductor Dia. 0.03mm-0.8mm Served Litz Wire
Served litz wire, as one kind of magnet wires, is characterized by consistent appearance and better impregnation other than its properties the same as normal litz wire.
-
Customized 38 AWG 0.1mm * 315 High Frequency Taped Litz Wire
The outer layer is PI film. The litz wire consist of 315 strands and the individual diameter is 0.1mm ( 38 AWG), and overlap of the outer PI film reaches 50%.
-
0.06mm *400 2UEW-F-PI Film High Voltage Copper Taped Litz Wire For Motor Winding
There are mainly 3 series of litz wire to which we committed ourselves for decades, comprised of normal litz wire, taped litz wire and served litz wire with an annual output of more than 2,000 tons. Our Taped Litz Wire products have spread out all over the world, including European countries, Japan, Australia, Russia and other countries. Our taped litz wire can work at max. 10,000V of voltage. They are widely used in devices in need of high frequency and high voltage power conversion.
-
0.4mm*24 High Frequency Mylar Litz Wire PET Taped Litz Wire
Breif introduction: This is a customized taped litz wire, because the outer layer is covered with PET film, it is also called Mylar litz wire. The myar litz wire is composed of 24 strand of 0.4 mm enameled copper round wires, and the temperature resistance level is 155 degrees. The maximum outer diameter of the mylar litz wire is 0.439 mm, a minimum breakdown voltage of 4000V, and overlap of the outer PET film reaches 50%.
-
0.1mm*500 PET Mylar Litz Wire Enameled Copper Taped Litz Wire
which uses 2UEW enameled round copper wire with a single wire diameter of 0.1mm (38AWG), a total of 500 strands, and a temperature resistance level of 155 degrees. This PET taped litz wire is an electromagnetic wire formed by retaliating a layer of Mylar film on the outside of the enameled stranded cooper wire according to a certain overlap rate. The thickness of the Mylar film is 0.025mm, and the overlap rate reaches 52%. It increases the insulation voltage of the wire and also acts as a shield. In this way, the Mylar litz wire has good high frequency performance, high insulation strength and good heat resistance. The finished outer diameter of this taped ltiz wire is between 3.05mm and 3.18mm, and the breakdown voltage can reach 9400 volts. This wire can be used for high temperature, high voltage motor, transformer and instrument winding.
-
0.1mm*130 PET Film Copper Stranded Wire Mylar Litz Wire
Taped Litz Wire, also called mylar litz wire, with a film wrapped outside, provide extra protection for the litz wire. Hence dielectric strength is strengthened. Flexibility and ability to cope with mechanical stress is enhanced as well. In some cases, taped litz wire can be a substitute for triple insulated wire in high frequency transformer. With breakdown voltage reaching up to 5KV, taped litz wire is suitable for application of operating frequency of 10kHz-5MHz and great loss of skin effect and proximity effect.
-
High Voltage 0.1mm*127 PI Insulation Taped Litz Wire
Taped litz wire 0.1mm*127 : This type of tape litz wire uses an enameled round copper wire with a single wire of 0.1mm (38awg), the temperature resistance rating is 180 degrees. The number of strands of this taped litz wire is 127, and it is wrapped with a golden PI film, which has good pressure resistance and high performance, and it also provides good electrical isolation.
-
High Voltage 0.1mm*127 PI Insulation Taped Litz Wire
Taped litz wire 0.1mm*127 : This type of tape litz wire uses an enameled round copper wire with a single wire of 0.1mm (38awg), the temperature resistance rating is 180 degrees. The number of strands of this taped litz wire is 127, and it is wrapped with a golden PI film, which has good pressure resistance and high performance, and it also provides good electrical isolation.
