Litz wire
-
0.2mmx66 Class 155 180 Multi-Stranded Copper Litz Wire
Litz wire is a high-frequency electromagnetic wire made of many individual enameled copper wires and twisted together. Compared with a single magnet wire with the same cross-section, the flexible performance of the litz wire is good for installation, and it can reduce the damage caused by bending, vibration and swing. Certification：IS09001/ IS014001/ IATF16949/ UL/ RoHS/ REACH
-
Self bonding Silk Covered Litz Wire 0.08×700 USTC 155 / 180 High Frequency Nylon Serving Litz Wire
Self bonding silk severed litz wire, is s kind of silk covered litz wire with self bonding layer outside of the silk layer. That makes easier to adhesive the coils between two layers during winding process. This self-bonding litz wire combines excellent bond strength with good windability, fast soldering, and very good hot air bonding characteristics.
-
0.1mm x200 Red Color Twist Copper wire Double-color Litz Wire
Litz wire is an essential component in power electronics,specifically designed to reduce skin effect and proximity effect losses.It is typically used in applications operating within a frequency range of 10 kHz to 5 MHz.For products operating beyond this frequency range, special litz wire products can be supplied. This is composed of many thin enameled copper wire strands individually insulated and twisted together.The enameled copper wire can choose the color of natural and red, which is suitable for the need to distinguish the wire ends.
-
0.08×270 USTC UDTC Copper Stranded Wire Silk Covered Litz Wire
Litz wire is a particular type of multistrand wire or cable used in electronics to carry alternating current at radio frequencies. The wire is designed to reduce the skin effect and proximity effect losses in conductors used at frequencies up to about 1 MHz. It consists of many thin wire strands, individually insulated and twisted or woven together, following one of several carefully prescribed patterns often involving several levels. The result of these winding patterns is to equalize the proportion of the overall length over which each strand is at the outside of the conductor Silk severed litz wire, is wrapped single or double layer nylon, natural silk and Dacron on the litz wire.,
-
0.1mmx 2 Enameled Copper Stranded Wire Litz Wire
Our high quality Litz wire is widely used in electronic components for high frequency applications such as high frequency transformers andhigh frequency inductors. It can effectively reduce the “skin effect” in high frequency applications and reduce high frequency current consumption. Compared with single-strand magnet wires of the same cross-sectional area, litz wire can reduce impedance, increase conductivity, improve efficiency and reduce heat generation, and also have better flexibility.Our wire have passed multiple certifications: IS09001, IS014001, IATF16949 ,UL,RoHS, REACH
-
0.08mmx210 USTC High Frequency Enameld Stranded Wire Silk Covered Litz Wire
Silk covered litz wire or USTC,UDTC,has a nylon top coat over the regular litz wires to enhance the mechanical properties of insulation coat, like nominal litz wire designed to reduce the skin effect and proximity effect losses in conductors used at frequencies up to about 1 MHz. Silk covered or silk severed litz wire, that is high frequency litz wire wrapped with Nylon, Dacron or Natural silk, which is characterized by increased dimensional stability and mechanical protection Silk covered litz wire is used to make inductors and transformers, especially for high frequency applications where the skin effect is more pronounced and proximity effect can be an even more severe problem.
-
0.04mm-0.5mm Single Diameter PET Mylar Taped Litz Wire
Taped litz wire comes when on the surface of normal litz wire is wrapped with mylar film or any other film by a certain degree of overlapping. If there are applications requiring high breakdown voltage, it is highly advisable to apply them to your devices. Litz wire wrapped with tape can strengthen ability of the wire to withstand flexible and mechanical stress. When used along with certain enamel, some tapes can achieve thermally bonded.
-
0.04mm*220 2USTC F Class 155℃ nylon Silk Served Copper Litz Wire
On the basis of litz wire, served litz wire is coated by layers of textile yarn for better mechanical properties, including nylon, polyester, dacron or natural silk.
-
USTC-F 0.08mmx17 nylon served stranded enameled wire silk covered litz wire
Customized silk covered litz wire with single wire 0.08mm, and 17 strands, that is designed for high frequency application Single silk severed with nylon material, that is solder able without pre-stripping process,greatly save a lot of time.
-
0.08mmx105 Silk Covered Double Layer High Frequency Litz Wire Insulated
AWG 40 single wire is very popular for silk severed litz wire. You may see the USTC UDTC in silk covered litz wire. USTC represent single layer of silk covered litz wire UDTC represent double layer of silk severed litz wire. We will choose single or double layer according to strands quantity and also depend on customer’s demand.
-
0.03mmx10 Enameled Copper Stranded Wire Silk Covered Litz Wire For Voice coils
0.03mm or AWG48.5 diameter of single wire is the Min. diameter we can produce for litz wire. 10 strands design make the wire is very suitable for electronic device.
-
USTC 155/180 0.2mm*50 High Frequency Silk Covered Litz Wire
Single wire 0.2mm is a little thicker in comparison with all other sizes on our website. However,the thermal class has more options. 155/180 with polyurethane insulation, and class 200/220 with Polyamide imide insulation. The material of silk is including Dacron,Nylon,natural silk, self bonding layer(by Acetone or by heating). Single and double silk wrapping available.
